Loading... Please wait...

How To?

To get the most out of your new Coi product, please carefully follow the instructions outlined in this guide. If you have any further questions, please feel free to reach out to us on the "Contact Us" page and we would be happy to help! 

 

Arctic Ecig

arctic-vape-how-to.png

 

The Coi Arctic model features a three piece design as diagrammed above. This model features a permanently attached mouthpiece with a bottom coil heating mechanism. To set-up the Arctic model, follow these steps:

  1. Remove the tank from the battery by twisting counterclockwise.
  2. Hold the tank with the mouthpiece facing down and open the tank by unscrewing at the metal band to remove the bottom coil.
  3. Fill the reservoir surrounding the hollow center tube with approximately 2ml of Coi E-liquid.  Do not over fill. Do not put e-liquid in the center tube, this is for air flow only.
  4. Once filled, replace the bottom coil securely. 
  5. Thread the Arctic tank to the battery. Do not over-tighten. Over tightening may result in cracking of the tank and cause leaking and/or poor performance.
  6. Once setup, turn on the Coi 900 battery by pressing the power button five times rapidly.
  7. To use, press the power button while drawing on the mouthpiece.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Liquid: Refill when the e-liquid level becomes low to avoid damaging the tank.  When the flavor or vapor production becomes reduced, it may be time to replace the tank.  See tank replacement in the Tips & Tricks section.

 

Beluga Ecig

beluga-vape-how-to.png 

The Coi Beluga model features a five-piece design as diagrammed above (removable mouthpiece not diagramed). To set-up the Beluga model, follow these steps:

  1. Remove the tank from the battery by twisting counterclockwise.
  2. To open the Beluga tank for refilling, hold the tank with the mouthpiece facing down and unscrew at the joint between the blue aluminum casing and the clear portion of the tank as shown in the image.    
  3. On the Beluga model, liquid is filled in the blue aluminum casing portion of the tank. Fill this reservoir surrounding the inner stainless tube with approximately 2ml of Coi E-liquid. Do not over fill. Do not get e-liquid into the inner stainless tube, this is for air flow only.
  4. Once filled, screw back on the bottom coil securely (the clear portion). 
  5. Thread the Beluga tank to the battery. Do not over-tighten. Over tightening may result in cracking of the tank and cause leaking and/or poor performance.
  6. Once setup, turn on the Coi 900 battery by pressing the power button five times rapidly.
  7. To use, press the power button while drawing on the mouthpiece.
  8. When refilling, note to hold the mouthpiece facing down before unscrewing to avoid spilling liquid.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Liquid: Refill when the e-liquid level becomes low to avoid damaging the tank.  When the flavor or vapor production becomes reduced, it may be time to replace the tank.  See tank replacement in the Tips & Tricks section.

 

Sevruga Ecigsevrugainstructionsmaller.png

The Coi Sevruga model features a three-piece design as diagrammed above. To set-up the Sevruga model, follow these steps:

  1. Remove the black plastic mouthpiece by twisting it counter-clockwise.
  2. Fill the reservoir surrounding the inner stainless tube with Coi e-liquid to the 1.6ml capacity indicated on the tank. Do not over fill. Do not get e-liquid into the inner stainless tube, this is for air flow only.
  3. Once filled, replace the mouthpiece in order to seal the tank.
  4. Thread the tank to the battery. Do not over-tighten. Over tightening may result in cracking of the tank and cause leaking and/or poor performance.
  5. Once setup, turn on the Coi 900 battery by pressing the power button five times rapidly.
  6. To use, press the power button while drawing on the mouthpiece.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Liquid: Refill when the e-liquid level becomes low to avoid damaging the tank.  When the flavor or vapor production becomes reduced, it may be time to replace the tank.  See tank replacement in the Tips & Tricks section.

 

Osetra Ecigosetrainstruction.png

The Coi Osetra model features a four-piece design as diagrammed above. To set-up the Osetra model, follow these steps:

  1. To open the Osetra tank, remove the cap by turning counterclockwise on the circular metal top just below the mouthpiece.
  2. Fill the reservoir surrounding the inner stainless tube with Coi e-liquid to the 2ml capacity indicated on the tank.  Do not over fill. Do not get e-liquid into the inner stainless tube, this is for air flow only.
  3. Once filled, replace the lip in order to seal the tank.
  4. Thread the tank to the battery. Do not over-tighten. Over tightening may result in cracking of the tank and cause leaking and/or poor performance.
  5. Once setup, turn on the Coi 900 battery by pressing the power button five times rapidly.
  6. To use, press the power button while drawing on the mouthpiece.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Liquid: Refill when the e-liquid level becomes low to avoid damaging the tank.  When the flavor or vapor production becomes reduced, it may be time to replace the tank.  See tank replacement in the Tips & Tricks section.

 

Kaluga Ecigkalugainstructionsmaller.png

The Coi Kaluga model features a three piece design as diagrammed above. This model features a permanently attached mouthpiece with a bottom coil heating mechanism. To set-up the Kaluga model, follow these steps:

  1. Remove the tank from the battery by twisting counterclockwise.
  2. Hold the tank with the mouthpiece facing down and open the tank by unscrewing at the metal band to remove the bottom coil.
  3. Fill the reservoir surrounding the inner stainless tube with approximately 2ml of Coi E-liquid.  Do not over fill. Do not get e-liquid into the inner stainless tube, this is for air flow only.
  4. Once filled, screw back on the bottom coil securely. 
  5. Thread the Kaluga tank to the battery. Do not over-tighten. Over tightening may result in cracking of the tank and cause leaking and/or poor performance.
  6. Once setup, turn on the Coi 900 battery by pressing the power button five times rapidly.
  7. To use, press the power button while drawing on the mouthpiece.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Liquid: Refill when the e-liquid level becomes low to avoid damaging the tank.  When the flavor or vapor production becomes reduced, it may be time to replace the tank.  See tank replacement in the Tips & Tricks section.

 

Caspian Ecigcaspianinstruction.png

The Coi Caspian model features a three-piece slim design as diagrammed above. To set-up the Caspian model, follow these steps:

  1. Remove the plastic mouthpiece by twisting counter-clockwise.
  2. Fill the reservoir surrounding the inner stainless tube with Coi e-liquid to approximately 75% capacity. 
  3. Once filled, replace the mouthpiece.
  4. Thread the Caspian tank to the battery. Do not over-tighten. Over tightening may result in cracking of the tank and cause leaking and/or poor performance.
  5. Once setup, simply draw on the mouthpiece to activate. The LED tip will light up red to show that the auto-battery is in use.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Liquid: Refill when the e-liquid level becomes low to avoid damaging the tank.  When the flavor or vapor production becomes reduced, it may be time to replace the tank.  See tank replacement in the Tips & Tricks section.

 

Triple Zero Wax Pen

triplezeroinstruction2.png

The Coi Triple Zero Wax model is exclusively for use with wax and concentrate products (such as e-solids). To set-up the Triple Zero model, follow these steps:

  1. Remove the plastic mouth tip by pulling it out.
  2. Inside the globe is a small white ceramic “bowl” with a heating coil in the center. Use a fill tool (not included in the kit) to dab a small amount (~0.1g) of e-solid wax/concentrate into the ceramic heating chamber.  Adequately cover the coil but do not overfill.  It is better to under-fill than to overfill.
  3. Once filled, push back in the mouth tip.
  4. Twist the Triple Zero globe into the battery. Do not over-tighten. Over tightening may result in cracking of the globe and cause leaking and/or poor performance.
  5. Once setup, turn on the Coi 900 battery by pressing the power button five times rapidly.
  6. Before using for the first time, prime the coil by pressing the power button for a few seconds (without drawing on the device) to heat up the concentrate. Use very light and sparing heat.  
  7. To use, press the power button while drawing on the mouthpiece.

Low Battery: When the battery’s LED light flashes when attempting to draw, it is time to re-charge the battery. Follow the steps in the Coi Battery section of this guide to re-charge the battery.

Low Wax: Refill when the concentrate level becomes low to avoid damaging the tank.

 

Coi Battery

coibattery4.png

All batteries come pre-charged for your convenience. The Caspian model includes a 280mah compact auto-battery which you simply charge and draw on to use. All other Coi Starter Kits include a high capacity 900mah battery equipped with an LED ON/OFF switch. When you receive your battery it will be in OFF mode. To turn ON the battery simply push the LED button five times rapidly.

Coi Battery Charging: When the battery’s LED light flashes when pressed, it is time to re-charge the battery. On the Caspian model the tip of the battery will blink. To re-charge, follow these steps:

  1. Detach the Coi battery from the tank.
  2. Once removed, screw the battery into the included Coi USB charger by twisting into the corresponding threads. The indicator light on the chargerwill remain red while the battery is charging.
  3. Once fully charged, the indicator light will turn green. Remove the battery from the charger. Do not overcharge. Approximate time to re-charge is 3-4 hours.

Thermal Cutoff: The Coi 900 battery has a ten (10) second thermal cutoff feature designed to protect the tank from overheating. If the ON/OFF switch is held for ten seconds the thermal cutoff will temporarily block power to the battery allowing the tank to cool. Power will be restored after a few seconds. 

Battery Maintenance: To maintain proper usage and charging, the battery threads must remain free of dirt and residue.  Simply wipe off with a tissue when the threads on the battery or charger become dirty. 

CAUTION: Use only the provided USB cable when charging the Coi battery to avoid damaging the battery.  Use of other chargers or improper storage/handling may cause the battery to fail, become defective, or even explode. Avoid direct impacts. Always handle with care. Keep away from high temperature environments when in use or storage. Keep away from moisture. Do not over charge. Unscrew the battery from the USB thread once fully charged. If battery is found to be leaking, overheating, smoking or deformed immediately cut off the power supply and put it away from yourself and other people.

tipsntricks.png

Refilling: Vapor amount and flavor will decrease when the model needs to be refilled. Repeat setup steps to refill the tank. Do not allow the tank to become completely empty of e-liquid before refilling. Use of Coi products when empty can cause your tank to overheat and have a shortened life span.

Tank Replacement: If vapor amount and flavor continue to be below expectations it may be time to replace the tank. When the tank wears down it also may begin to leak slightly. The tank should be replaced after approximately 10ml of e-liquid (one Coi e-liquid bottle) has passed through the tank. To get the most out of your product, Coi recommends replacing the tank every two weeks.    

Gurgling Noise: This is a sign that e-liquid has found its way into the metal tube in the center of the tank (usually occurs after a refill). Removing the liquid from the center tube will resolve the issue. This can be achieved by removing the tank from the battery, wrapping a tissue at the base of the tank and blowing (softly) through the mouthpiece. If there was enough liquid it may have left residue on the top of the battery. To clean off the battery, crunch up tissue and pinch one end, then lightly smush it into the top of the battery and twist back and forth a few times.

Leaks: To minimize leaks, do not overtighten and maintain the tank 1/3 full of Coi e-liquid.  This helps to maintain the “vacuum” in the tank and prevent leaks.  When the tank wears down after extended use, it may begin to leak. If this occurs the tank should be replaced. Ensure the top of the battery is always dried if your tank leaks into it. 

Vapor Volume & Flavor: When using a new tank, initial puffs may taste slightly burnt. This is normal. It may take a moment for the e-liquid to saturate the coil. Allow several puffs for the flavor profile to fully develop. A long, slow, steady pull will give you the most vapor volume and flavor.  Short, hard puffs may cause the tank to become “flooded” resulting in reduced vapor production. When fully charged, Coi batteries will function at a slightly higher amperage. This means at a full charge the batteries will produce better vapor and flavor. If vapor volume remains low or the flavor tastes burnt, it may be time to replace the tank.

 

 



We Are Coi

We didn't want to just make E-Cigarettes like the rest, we wanted to bring you a classy experience that is both healthier for you and the people around you. With 5 Starter kits and over 20 flavors, we can help you stay COI.

Recent Updates

Newsletter